Keeping your hot tub clean and safe for use can be challenging, but a must if you want to enjoy it for years to come. One way to ensure your hot tub stays safe is to install and use an ozonator. Ozone, or activated oxygen, is a powerful disinfectant that will kill bacteria and keep your hot tub water crystal clear. In this article, you’ll learn the benefits of using an ozonator, what type of filter it requires, and how to install and maintain it.
What are the Benefits of Using an Ozonator
An ozonator is a great addition to your hot tub. Utilizing ozone gas, the ozonator helps reduce the amount of synthetic disinfectants you’ll need to use, leading to fewer chemical buildups in your hot tub. This helps to keep your hot tub water sparkly clear and safe for use. Ozone can also deep clean the tub by removing organic and inorganic contaminants.
Which Types of Filter Does It Require?
When installing an ozonator, you’ll need to use a separate filter or cartridge. There are two components that need to be installed in a hot tub. The main filter is installed in the pump and should be cleaned periodically. The secondary filter is a cartridge type filter, which is more efficient than the main filter and should be changed on a more frequent basis. Having the secondary filter with an ozonator will help keep your hot tub water clean and clear without much effort.
How to Install and Maintain an Ozonator
Installing an ozonator is relatively easy and can be done with some basic tools. The first step is to secure all tubing and connections, then mount the ozonator to the back of the hot tub pump. Next, install the secondary filter as per the instructions that came with the ozonator. Finally, plug the power cord into a ground fault circuit interrupter (GFCI) and switch on the ozonator.
Maintenance of the ozonator is relatively low. Every few weeks, check the filter and replace if needed. To ensure proper oxygenation, regularly check the air pressure to make sure the ozonator is working correctly.
People Also Ask
Q: Can I protect my hot tub from bacteria without an ozonator?
Yes, hot tubs can be protected from bacteria without an ozonator by using other manual methods such as periodic draining and cleaning, proper chemical balancing, and regular filter maintenance.
Q: Are there any downsides to using an ozonator?
Yes, ozone can be harmful to humans in high concentrations, so it’s important to make sure the levels in the hot tub remain within safe levels. It’s also important to make sure the ozonator isn’t running too long, as this can lead to an over-sanitized environment.
Q: How often should I replace the filter for the ozonator?
The filter should be replaced every 3-4 months, or when the pressure drops below a certain level.
Q: Is it difficult to install an ozonator?
No, installing an ozonator is fairly easy and can be done with basic tools.
Q: Are ozonators expensive?
No, ozonators are relatively inexpensive compared to other types of hot tub maintenance equipment.
Final Thoughts
An ozonator is a powerful and efficient way to keep your hot tub clean and safe for use. It doesn’t require much maintenance and is relatively easy to install. With just a few simple steps, you can install and use an ozonator to keep your hot tub water crystal clear for years to come.