Select Page

Draining Water from Your Pool After Rain

Summer storms can bring a heavy downpour and leave you with standing water in your pool. Draining water from your pool can be a daunting task, but with the right tools and knowledge, you can easily handle the job. In this article, we’ll show you how to drain pool water after a rainfall. 

Purchase the Services of a Pool Maintenance Profession

Hire an Expert

One of the easiest ways to eliminate the standing water in your pool is to hire a pool maintenance professional. These professionals can help you quickly drain the pool in a safe and effective manner. Most of them use a combination of pumps and vacuums to remove the excess water. This is a fast and efficient way to get rid of the water, and it won’t require you to lift a finger.

Get an Estimate

Before you hire a pool maintenance professional, make sure to get an estimate of the cost. This will help you determine the best option for your budget. Most pool maintenance services typically charge by the hour, and they may require that you pay a deposit before they start the job.

Do-It-Yourself Routine

Gather the Supplies

If you decide to tackle the job yourself, you’ll need to first gather the supplies. You’ll need a pool pump, vacuum hose, and a skimmer net. Make sure that the pump can handle the size of your pool before purchasing it.

Clean the Pool Area

Once everything is gathered, it’s time to start cleaning the pool area. You’ll need to remove any leaves or debris that have accumulated on the bottom and sides of the pool. Use the skimmer net to scoop out the leaves and debris. It’s best to do this in small sections so you don’t miss any spots. This will help prevent any clogs in the pump’s filtration system.

Set-up the Pump and Vacuum

Next, set up the pump and vacuum in the pool. The vacuum hose should be connected to the intake on the pump, and the other end should be submerged in the pool. Make sure that the pump is plugged into a GFCI protected outlet and it’s turned on. If the pump doesn’t turn on, check the outlet to make sure that it’s receiving power. Once the pump is turned on, it will begin to drain the pool.

People Also Ask

How Long Does it Take to Drain a Pool After Rain?

The amount of time it takes to drain a pool after a rainfall depends on the size of the pool, the amount of water in the pool, and the power of the pump used.

What to Do if The Pool Doesn’t Drain After Rain?

If the pool still has standing water after the pump has been running for a few hours, it could be due to a clog in the filtration system. It’s best to check the pump to identify any blockages that may be preventing the water from draining.

Should I Vacuum the Pool Before Draining It?

Yes, it’s a good idea to vacuum the pool before draining it. This will help remove any leaves, twigs, and other debris that may have accumulated on the bottom and sides of the pool. It will also prevent any blockages in the filtration system.

Do I Have to Replace the Pool Water After Draining It?

Yes, you should replace the pool water after you’ve finished draining it. This will ensure that the pool stays clean and the chemical levels remain balanced.

Should I Close the Drain Valve During Draining?

Yes, you should close the drain valve when draining the pool. This will prevent any air from entering the system which could cause damage to the pump.

Final Words

Draining water from your pool after a rainfall can be a challenge, but with the right equipment and know-how, it can be easily done. Hiring a professional pool maintenance service is the quickest and most efficient way to get rid of the standing water. For the DIYers, some supplies are needed and the pool must be vacuumed first before draining the water. Once the pool has been drained, the water should be replaced and the drain valve should be closed to avoid any damage to the pump.