Select Page

Do you want to open your own inground pool this season, but don’t know where to begin? Don’t worry! Opening an inground pool doesn’t have to be a stressful process. With just 10 steps, you can get your inground pool ready for the season. In this article, we’ll review each of the 10 steps and the supplies you will need.

STEP 1: Re-Attach Everything

To open your inground pool properly, it is important that you re-attach all of the components. Start by collecting any hoses, vacuum heads, skimmers, and other pieces that had been removed for winter storage. Make sure each piece looks clean and clear of debris such as leaves and dirt. It’s also important to check that the filter handles are closed, and that the filter lid is secured tightly to the filter housing.

Run the Pump

The next step is to turn on the pump. This will start the suction and circulation of your pool. Make sure the pump is running on high speed, as this will ensure that the water is filtered efficiently. It’s also important to check that the air relief valve is set correctly, as an incorrectly set valve could cause damage to the system.

Clean the Pool

Once the pump is running, it’s time to clean the pool. This can be done with a manual vacuum or an automatic pool cleaner. If you have an automatic pool cleaner, set it up and make sure it is running correctly. If you’re using a manual vacuum, attach it to the skimmer and lower it into the pool to start vacuuming. It’s important to check the filter bucket to make sure it is not clogged with debris.

People Also Ask

How do I balance the water chemistry of my inground pool?

Balancing the water chemistry of your inground pool will involve adding the correct amount of pH increaser and alkalinity increaser for your particular pool. It is also important to add chlorine or a chlorine-free sanitizer in order to keep the water clean and safe.

What type of pool filter is best for an inground pool?

The most efficient type of filter for an inground pool is a cartridge filter. A cartridge filter will remove small particles from the pool water and help keep the pool clean and clear.

How often should I backwash my inground pool?

Backwashing your inground pool should be done every week or two, depending on how much debris the pool is collecting. If the filter basket is full of debris, it’s a good indication that it time to backwash the filter.

Final Words

By following the steps outlined in this article, you can easily open your inground pool this season and enjoy it all summer long. Opening an inground pool may seem daunting at first, but with the right supplies and a few simple steps, you can get your pool ready for the season in no time.