Select Page

Winterizing an Intex Pool can be a difficult process. It requires hard work, and proper steps must be taken. From cleaning the pool, to eliminating fallen leaves and debris, to protecting the pool cover with a tarp, it all adds up to a long list of tasks. This article will guide readers through the process of winterizing an Intex pool in 12 easy steps.

1. Empty the Pool

The most important step in winterizing your Intex pool is to empty it completely. This means that all of the water needs to be removed from the pool, as well as any accessories – such as ladders, pumps, filters, and more. Make sure that the pump, filter, and all other equipment are turned off and unplugged before beginning to empty the pool. Once the pool is empty, it can be stored indoors or covered securely with a tarp.

1.1. Unplug All Equipment

Before emptying the pool, it is important to unplug all pool equipment, such as the pump and filter. This ensures that all of the components are turned off and not running when the pool water is drained.

1.2. Remove All Accessories

Before draining the pool, all accessories must be removed. This includes ladders, pumps, filters, lights, and any other pool accessories; as well as any toys that may have been left in the pool.

2. Clean the Pool

The next step in winterizing an Intex pool is to clean it. This includes scrubbing and vacuuming the walls and floors, as well as vacuuming the skimmer and filter. Use a long-handled scrub brush on the walls and floor of the pool, making sure to pay attention to any corners or areas that may have buildup or algae. This step ensures that the pool will be free of debris and contaminants when it is re-filled in the spring.

2.1. Scrub Walls and Floors

Start with a long-handled scrub brush and a mild detergent to scrub the walls and floor of the pool. Pay close attention to any corners or areas that may have buildup or algae. Scrub these areas carefully, and if necessary, use a stiffer brush to remove the buildup.

2.2. Vacuum the Skimmer and Filter

The next step is to vacuum the skimmer and filter. Use a vacuum hose to remove any debris and lingering dirt and sand. This ensures that the pool water will be as clean as possible when it is re-filled in the spring.

3. Check the Pool Liner

Before winterizing the pool, check the pool liner to make sure it is in good condition. Inspect the liner for any rips, holes, or tears, and replace if necessary. A torn or ripped liner will be a weak point and can cause the pool to collapse.

3.1. Inspect the Liner

Use a flashlight to inspect the liner for any rips, holes, or tears. Pay close attention to any seams or edges where loose threading may be present. Replace the liner if any damage is found.

3.2. Patch Tears and Holes

If any tears or holes are found, use a vinyl pool patch to patch the liner. Make sure the patch is the same thickness and material as the pool liner, and that it is applied properly.

4. Remove Fallen Leaves and Debris

The next step in winterizing an Intex pool is to remove fallen leaves and debris from the area around the pool. Use a leaf blower or a rake and broom to get the job done quickly and effectively. Be careful when using the leaf blower, as it can cause dust and debris to enter the pool and clog the skimmer and filter.

4.1. Leaf Blower

Start with a leaf blower to quickly remove the leaves and debris surrounding the pool. Be sure to wear protective clothing, such as a mask, and use eye protection.

4.2. Rake and Broom

After using a leaf blower, use a rake and broom to get rid of the remaining debris and leaves. This step ensures that the pool will not be clogged when it is filled with water.

5. Protect Pool Cover with a Tarp

The next step in winterizing an Intex pool is to protect the pool cover with a tarp. This helps keep the cover from becoming damaged during the winter months. Secure the tarp to the cover with nylon cording, and use large rocks or other heavy objects to keep the tarp from blowing away.

5.1. Secure the Tarp

Secure the tarp to the pool cover with nylon cording. Make sure the cording is tight and will not come loose during windy conditions.

5.2. Use Large Rocks or Heavy Objects

Place large rocks or heavy objects on the corners of the tarp to keep it from blowing away. This will ensure the tarp stays in place throughout the winter months.

People Also Ask

How often should an Intex pool be winterized?

An Intex pool should be winterized every year, as soon as the weather begins to cool and the pool is no longer in use.

What do I need to winterize my Intex pool?

You will need a nylon cording, tarp, rocks or other heavy objects, a leaf blower, and a mild detergent with a scrub brush.

Can I leave water in an Intex pool during the winter?

No, it is not recommended to leave water in an Intex pool during the winter months, as it can cause the pool liner to stretch and become damaged.

What temperature should an Intex pool be before winterizing it?

The water temperature of the Intex pool should be below 50 degrees Fahrenheit before winterizing it, as cold weather is extremely hard on the pool liner.

Final Words

Winterizing an Intex pool is an important and necessary step to ensure the longevity of your pool. It is important to take each step carefully and make sure that the process is done properly. Following the steps outlined in this article will help you winterize your Intex pool in 12 easy steps.