Having your own hot tub is something many people dream about, but sometimes the reality of cleaning and maintaining it can be a bit overwhelming. The main part of hot tub maintenance is the regular draining, flushing, and refilling of the hot tub. Here is a simple guide to help you manage this process!
Preparing To Drain Your Hot Tub
Turn Off The Power
The first and most important step is to make sure the hot tub power is turned off. To ensure your safety, shut off the power at the breaker before draining. Additionally, some components of the hot tub won’t require draining, so make sure all components you do not need to drain are protected with plastic or tape.
Gather Your Supplies
Once you have the power turned off, it is time to gather your supplies. You will need a garden hose, a clean bucket, two 2-gallon plastic buckets, rubber gloves, filter cleaner, and filter flush.
It is important to make sure all of your supplies are clean and free of debris. Before you begin the draining and refilling process, fill the clean bucket with a few gallons of water. This will help to maintain balance and lessen the strain on your plumbing.
Set Up the Drain Line
Once you have all of your supplies and the power is off, you are ready to set up the drain line. Take one of the two 2-gallon buckets and fill it with warm water. Place the garden hose at the bottom of the bucket and turn the hose on full blast. Place the end of the hose in the cold-water intake port, and you are ready for draining.
Draining Your Hot Tub
Turn on the Valves
Once the hose is connected to the cold-water intake valve, it is time to turn on the valves. Open the air relief valve, the drain valve and the flow control gate all the way open. This will allow the hot tub to completely drain.
Relieve Pressure on the Lines
As the hot tub is draining, it is important to relieve the pressure on the lines. Lift the cover and slowly unscrew the filter head to release the pressure. This will also help to clear out any debris that may be clogging the lines. You can also use a garden hose to flush the lines and remove any additional debris.
Check the Level
Once the hot tub has drained, you will need to check the water level. Pay close attention to the water level and make sure it is not draining too low. You should also make sure the drain valve is closed before you move on to the next step.
Flushing the Hot Tub
Mix the Filter Flush
Once you have checked the water level, it is time to flush the hot tub. Start by mixing the filter flush according to the directions on the bottle. This mixture should consist of one part filter flush and two parts water.
Run the Flush
Once the filter flush is mixed, pour it into the skimmer and turn on the pump. Allow the filter flush to circulate for at least 30 minutes. This should be enough time to flush the lines and get rid of any debris.
Turn Off the Pump and Drain
After the filter flush has circulated for 30 minutes, turn off the pump and drain the hot tub. Make sure the drain valve is closed as soon as the water has finished draining.
Refilling the Hot Tub
Refill the Hot Tub
Now that your hot tub is drained and flushed, it is time to start refilling it. Start by reconnecting the garden hose to the cold-water intake valve. Once the hose is connected, you can turn on the water and start to refill the hot tub. Keep an eye on the water level and make sure it is rising evenly.
Clean the Filters
As the hot tub is refilling, make sure to clean the filters. Use the filter cleaner to thoroughly clean the filter and rinse it with a pressurized garden hose. Cleaning the filter will help to remove debris and contamination from the water.
Add Treatment Chemicals
Once the hot tub is full, you will need to add treatment chemicals. These chemicals will help to maintain the water’s quality and protect it against bacteria and contamination. Make sure to read the instructions on the bottle and add the chemicals as directed.
People Also Ask
How often should a hot tub be drained?
Hot tubs should be drained and refilled every 3-4 months in order to maintain clean and safe water.
Can you drain a hot tub with a garden hose?
Yes, you can drain a hot tub with a garden hose. Place the end of the hose in the cold-water intake port and allow the water to drain out.
What chemicals should be used to flush a hot tub?
Hot Tub Flush is the recommended chemical to use when flushing a hot tub. It helps to remove contaminants from the water.
Can I use bleach to flush my hot tub?
No, bleach should not be used to flush a hot tub as it can damage the components and contaminate the water.
Do I need to add chemical after refilling my hot tub?
Yes, it is important to add chemicals after refilling your hot tub to maintain water quality and protect it against bacteria and contamination.
Draining and refilling your hot tub is an important part of maintaining it. Although it can seem like a daunting task, following the steps outlined in this guide will make the process much easier and more efficient. Following these simple steps will ensure your hot tub is clean and safe for you and your guests to enjoy!